FAQs Frequently Asked Questions About our Products and Solutions

Submit an enquiry Submit an enquiry

All FAQs (1823 total: showing 1761-1780)

If several 229 probes begin returning very low positive and negative values for dT, what might be the cause?
How should the AM25T be used?
Can the AM25T be connected to an analog input channel on a device other than a data logger, such as a programmable logic controller (PLC)?
How can the data logger build a text string and send it out the RS-232 port?
I plan to set up an eddy covariance system in a remote wetland located in Michigan's upper peninsula. This site does not have power and is difficult to get to. I would like to set up a communication system that allows me to monitor the data from my office (Michigan Tech). There is a research station near the site (less than 5 km away--Seney National Wildlife Refuge) that could be used to collect the data before bouncing it to me.
I am writing from Universidad de Cuenca in Ecuador, and I would like to know if we can use ST-20 Argos Satellite Transmitter in Ecuador? Are there other choices for Ecuador?
Do Campbell systems support other satellite networks such as Iridium and Orbcomm? If the answer is "yes", do you know if the area of Somalia is covered by those services?
I need help with a satellite telemetry system to be used in northern Somalia for hydrological and meteorological station data transfer for a flood early-warning application.
What would be the best telemetry system for remote data collection from valley bottoms in a dense redwood forest?
I am looking for information on the 21X Micrologger, specifically about removal of the expansion memory module. I was trained on the CR10X, but have no info on the 21X.
Can a point-multipoint network be built using RF401 radios with a base and three remote terminals, a data logger at each terminal, a COM210 modem, and a remote PC with LoggerNet software?
What is the current shipping version of Baler?
When trying to start LoggerNet, what might cause the "Unable to start program because the Campbell Scientific communications server is already running" message?
After installing an upgrade to the current version of LoggerNet, why does the Toolbar no longer show all the buttons?
Why can't I remotely load an OS to my CR1000 from my Dell D600 laptop?
Why is the battery in the BP12 and BP24 assembly taller than the bracket?
What are the differences between the CR23X and the CR3000?
What type of account do I need to set up with Cingular to use the Raven110 GPRS modem?
Is there a manual available for the LI7500? I've been unable to locate one on your web site.
Is there a manual available for the SAT HDR GOES?

Previous Next